- El Paso, TX
Used pallet racking is the fastest way to add storage capacity without spending new-rack money. Inspected used systems typically cost 40 to 60 percent less than new while carrying the same load ratings, which is why most El Paso warehouses are expanding on a budget to buy used.
There is a local advantage worth knowing. El Paso sits in a dry desert climate with very low humidity, so used pallet racks pulled from facilities in this region typically carry far less corrosion than second-hand pallet racking sourced from the Gulf Coast, the Midwest, or the Northeast. Steel loses capacity to rust and impact, not to age, and our climate removes one of those two variables.
At El Paso Pallet Racking, we stock used teardrop uprights, beams, wire decking, and complete bays, plus drive-in, push-back, and cantilever systems as they become available. Everything is inspected before it enters inventory, and everything is quoted the same day.
We also buy. If you are clearing a facility, we will quote your racking and handle the teardown.
Call us at (915) 218-4678 or click below for a free estimate.
Inventory moves fast, so call to confirm current availability. Typical stock:
| Component | Common Sizes | Notes |
|---|---|---|
| Teardrop uprights | 42″ and 48″ deep x 8′, 12′, 14′, 16′, 18′, 20′, 24′ tall | Most common El Paso request is 42″ x 16′ |
| Teardrop beams | 8′, 9′, 10′, 12′ long x 3″, 4″, 5″ face | Sold in pairs, capacity varies by face height |
| Wire decking | 42″ x 46″, 46″ x 46″, 42″ x 52″ | Waterfall and flush styles |
| Starter bays | 2 uprights, 4 beams, decking | Complete bay ready to install |
| Add-on bays | 1 upright, 4 beams, decking | Extends an existing run |
| Cantilever | Single and double sided | For pipe, lumber, and long loads |
| Drive-in and push-back | Varies by lot | Availability is intermittent, call to check |
Every component is inspected for bends, cracked welds, rust, and connector wear before it is sold. Nothing damaged beyond ANSI MH16.1 tolerances goes into stock. Call us at (915) 218-4678 or click below for a free estimate.
Pricing depends on style, condition, and quantity, but the market ranges are predictable. Used uprights commonly run $50 to $100 each, and used beams $20 to $45 depending on length and capacity. Complete used starter bays typically land around $500, with add-on bays closer to $410. Across a full system, used pallet rack generally saves 40 to 60 percent against new.
Universal teardrop holds value best because it is the most widely compatible style. Proprietary or obsolete bolted systems cost less to buy but are harder to expand later, which is worth factoring in before you commit, particularly in a market where operations here expand on short notice.
Send us your bay count, beam length, and upright height, and we will return itemized pricing the same day.
Buying used equipment requires trust. Every unit we sell goes through a strict sourcing and inspection process.
Carefully Selected Sources. We source from facility closures, relocations, and warehouse downsizings across West Texas, southern New Mexico, and the border region, which means we know the history of what we sell.
Thorough Inspections. Each component is checked for bends, rust, weld integrity, and connector wear. Columns exceeding the ANSI MH16.1 straightness tolerance are repaired or scrapped rather than sold.
Safety Standards. All systems meet current load-rating requirements, and we supply capacity documentation so your racks can carry compliant load plaques.
Restoration When Needed. Where a component is worth saving, we clean, replace hardware, or reinforce it before it goes into stock.
When buying used pallet racking in El Paso, you need more than a reseller. Here is why businesses trust us:
Our crews know how to anchor uprights properly, level beams accurately, and install racking systems that pass inspections the first time. We have worked with everything from selective racking to drive-in systems across El Paso warehouses. You get installations done right without callbacks or corrections.
From industrial shelving systems to mezzanine platforms and inspected used racking, we supply storage solutions built to handle heavy loads. Our products meet industry standards and come from manufacturers we trust. You get reliable equipment backed by professional installation and ongoing support.
We would love to hear from you! Please fill out this form and we will get in touch with you shortly.
"*" indicates required fields
El Paso pallet rack systems, material handling equipment, pallet racking, lift trucks, heavy and light duty shelving, modular offices, and mezzanines for warehouse and industrial use in El Paso, TX.
